GE Refrigerator Water Coil Replacement #WR17X11324
Icemaker Installation Tubing. There should be sufficient tubing from the cold water supply to allow you to move the refrigerator out from the wall several feet. There is no maximum length, you can run the line as long as needed to reach a main water line. We recommend 1/4" O.D. (outside dimension) GE SmartConnect . 26 Sep General Electric refrigerators can include drinking water dispensers and also icemakers. These accessories require a water line. Many kitchens have a refrigerator water line hookup on the wall behind. Water line can enter the opening through the floor or through an adjacent cabinet , as close to the back wall as possible. The water line should be GE. SmartConnect™ Refrigerator Tubing or 1/4" O.D. copper tubing between the cold water line and water connection location at the rear of the refrigerator. Installation of an.
Why do I have to complete a CAPTCHA?
Imagine the convenience of having cold water or ice cubes any time you want them -- no more filling up pitchers to keep in the refrigerator or waiting for ice cube trays to freeze. But once you've bought a refrigerator with a cold water dispenser and automatic ice maker, you'll still need a way to get water into it.
Plug in the refrigerator. When connecting your refrigerator to a GE Reverse. Thread copper tubing through the hole you just drilled. Discard the first two or three batches of ice to flush the system. All installations must be in accordance with local.
It takes patience, but you can hook a water line up to your refrigerator on your own. Family HandymanWhirlpool ].
GE Side by Side Refrigerator Water Line Repair
How savvy are you at selecting the best kitchen appliances? The Ultimate Refacing an Appliance Quiz. Shut off the water supply. Locate the cold water source closest to the refrigerator. You'll want to use water lines that are already in place if possible, rather than attempting to install new pipes.
Drill a hole either through the cabinet wall separating the space under the sink and the refrigerator or in the basement ceiling up to the refrigerator.
Thread copper tubing through the hole you just drilled. Attach one end of the copper tubing to the refrigerator's water pipe, using a nut and ferrule.
Make sure you leave extra tubing coiled behind the refrigerator, so you can move the refrigerator when necessary. Cut the cold water line under the sink or in the basement and attach a copper T-fitting. Attach a water valve to the T-fitting.
This will control the water flow and water pressure to the refrigerator. Be sure to put a gasket seal between the valve and the T-fitting. Attach the free end of the copper tubing to the valve. Now the refrigerator is connected. Clamp any tubing inside the cabinets along the back of the cabinets, to keep it in place. Turn on the water supply.
You should have cold water very shortly. You will have to wait hours before you have ice. Related Content " ".
When connecting your refrigerator to a GE Reverse. Attach the nut to the refrigerator valve. Resources 1 Ask The Builder: But once you've bought a refrigerator with a cold water dispenser and automatic ice maker, you'll still need a way to get water into it.
Do washers control allergens? How the Toto Washlet Works.
How to Install a Water Line for a Refrigerator Ice Maker | Home Guides | SF Gate
How Solar-powered Refrigerators Work.